Send Message
Home ProductsDifferential Pressure Switches

20 Bar Differential Pressure Switches For Monitoring Pump Boiler Flow Filter Conditions

Certification
China Keram (Nanjing)ELECTRICAL Equipment Co., Ltd. certification
China Keram (Nanjing)ELECTRICAL Equipment Co., Ltd. certification
Customer Reviews
The flow switch is very good, the appearance is also beautiful, in line with the manufacturer's description.

—— KENT

The differential pressure transmitter is in line with my use requirements, and the manufacturer is also very cooperative, helping me solve a lot of problems, and the service is very good.

—— John

I'm Online Chat Now

20 Bar Differential Pressure Switches For Monitoring Pump Boiler Flow Filter Conditions

20 Bar Differential Pressure Switches For Monitoring Pump Boiler Flow Filter Conditions
20 Bar Differential Pressure Switches For Monitoring Pump Boiler Flow Filter Conditions 20 Bar Differential Pressure Switches For Monitoring Pump Boiler Flow Filter Conditions 20 Bar Differential Pressure Switches For Monitoring Pump Boiler Flow Filter Conditions

Large Image :  20 Bar Differential Pressure Switches For Monitoring Pump Boiler Flow Filter Conditions

Product Details:
Place of Origin: China
Brand Name: Keramcontrols
Certification: CE
Model Number: KCL
Payment & Shipping Terms:
Minimum Order Quantity: 10
Packaging Details: Carton
Delivery Time: 7days
Payment Terms: L/C, T/T

20 Bar Differential Pressure Switches For Monitoring Pump Boiler Flow Filter Conditions

Description
Model: KCL Maximum Operating Pressure: 20 Bar
Cable Gland: PG 9 Thread (female In Body) Life: >106 Switching Cycles
Contact: SPDT Micro-switch With A Rating Of 5A At 250V AC Working Temperature: 10 To 85℃
Protection: IP54
Highlight:

IP54 Differential Pressure Switches

,

20 bar Differential Pressure Switches

,

Monitoring Pump dp switch in hvac

KCL Series Black Steel Differential Pressure Switches For Monitoring Pump, Boiler Flow And Filter Conditions

 

 

Description

 

Differential pressure switch is used to monitor the pressure difference of neutral and slightly aggressive liquid and gases. It is applied to monitor pump status, boiler, flow, and filter condition. It will send the signal when the flow or pressure falls or rises to an alarm condition. The special design makes it easy for installation and adjusting the switching point.


Feature

 

  • High over pressure safety margin to 20bar
  • Adjustable mounting bracket
  • Switching point is easy to be adjusted with adjustable screw
  • Enclosure rating IP54
  • CE approval

Installation

 

  • Make sure that the maximum pressure of DPS is higher than that of the pressure to be applied
  • P1 is the high pressure side and P2 is the lower pressure side, it can't be fit reversely
  • Make sure that the electrical supply is isolated before removing the cover
  • Make sure the DPS electrical switch is of the correct rating
  • Make sure the terminals are correctly connected and the DPS is correctly earthed
  • Make sure the ambient and process temperature acting on the DPS should be within the -10 to 85℃
  • Make sure that DPS is installed in a place with no vibration
  • For monitoring the pressure of liquid, DPS has to be installed horizontally to make sure the accuracy of measurement will not be effected by gravity
  • Make sure there has no sediments go into the sensor
  • Make sure there are no valves between sensing points
  • Adjusting switching point with the screw driver by the adjusting screw
  • Test the whole system

Dimensions ( mm )

 

20 Bar Differential Pressure Switches For Monitoring Pump Boiler Flow Filter Conditions 0

 

No.

Type

KCL250
KCL1000
KCL4000
A φ29.0 φ40.5
B 18.5 31.5
C 378 43.0
D 76.0 81.0
E 18.8 21.5
F 133.5 139.0

Specifications(mm)

 

20 Bar Differential Pressure Switches For Monitoring Pump Boiler Flow Filter Conditions 1

Type Pressure Range Hysteresis
KCL250 40 to 250 mbar 25 mbar
KCL1000 0.07 to 1 bar 50 mbar
KCL4000 0.2 to 4 bar 100 mbar

 

Maximum operating pressure 20 bar
Cable gland PG 9 thread (female in body)
Contact SPDT micro-switch with a rating of 5A at 250V AC
Life >106 switching cycles
Materials Body Brass
Cover Steel with power painting
Diaphragm EPDM
Pressure connection

G1/8"(DIN 259),1/8" BSP female thread

(P1>P2)Enclosure

Enclosure rating IP54
Working temperature -10 to 85℃
Dimensions (H*L*W) 133.5x675x67.5mm,139x675x67.5mm
Weight 1100g,1320g

 

20 Bar Differential Pressure Switches For Monitoring Pump Boiler Flow Filter Conditions 2

 

FAQ

 

1 Q: What's the delivery time?

A: According to the specification and quantity of your order, generally 4

days for normal standard products within 10pcs.

 

2 Q:Are you manufacturer or trading company?

A: We are manufacturer with many years of experience.We have our

own factory.Welcome to visit our factory.

 

3 Q: Can we use our logo on the products?

A: Yes.We can provide OEM service.

 

4 Q: Do you have products with ex-proof certificate?

A: Yes,we can offer intrinsic-safety and flame proof certificates.

 

5 Q: What is the warranty of your products?

A: Normal is 12 months.

 

6 Q: What's the means of transport?

A: Express such as TNT,Fedex,DHL,UPS, or logistics by indicator.

 

Contact Details
Keram (Nanjing)ELECTRICAL Equipment Co., Ltd.

Contact Person: James

Tel: +86 13913010893

Send your inquiry directly to us (0 / 3000)